Sony Digital Camera
Setup on a Sea Breeze .40 size gondola.
 
     
This Model Is New For 2005.
 
 
Here is a look at the .40 size camera model.
 
 
I set this model up for a Sony Cyber Shot 7.2 Mega Pixels.
 
 
The camera is drop mounted.
 
     
I use a 1/4-20 nylon bolt in the tripod mounting hole to locate and secure the camera in the camera pad. You can see a video clip of the camera being drop mounted as well as how the camera is controlled by Clicking Here and letting the video clip load. Please give the clip time to load. It is worth the wait for sure.
 
  
Channels 6 and 7 are used to activate the camera.
 
 
The camera can be turned on or off  as well as tripping
the shutter using channel # 6 on my radio system.
 
   
Channel #7 is used to tilt the camera forward and back.
 
 
Here is a close look at the servo used to turn the camera On and Off as well as to take the pictures. You can see a video clip of this servo in action by Clicking Here and letting the video clip load. Please give the clip time to load. It is worth the wait for sure.
 
Here is a clip that shows the system and the way it works.
Please note that when I say let go in the video clip. I mean that the knob is turned and then returned to the center and then let go. Turning the knob all the way to the left and then returning the knob to center will turn On or Off the camera.
Turning the knob all the way to the right and then returning to the center will take a picture.
 

 
If you need more information on this setup or if you have questions. 
Just email me at: support@seabreezeparachutes.com
I am always glad to help when I can.