B-17
Landing Light
Fixtures made from a soda can.
Here is a look at the finished
results.
CLICK
HERE to view a video of the landing light test.
This is a case where you
have to take nothing and create something.
I started with a hole in
the wing the factory cut and a piece of clear
plastic that has been
shapped and pre-cut. (cut 3/32" short I might add)
After giving some
thought on creating a working set of landing lights.
Below is a look at what
I came up with.
If you have any
questions just ask.
Both Landing Lights
will be wired so when the gear is lowered they will come ON.
More Information
on this project is coming soon!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click HERE to return
to the B-17 main page
Click HERE to move
on to PAGE
2 (Nacelle prep for motors)
Click HERE to move
on to PAGE
3 (Mounting the cowling to the nacelle)
Click HERE to move
on to PAGE
4 (Mounting the wing / kit change?)
Click HERE to move
on to PAGE
5 (Installing the retracts)
Click HERE to move
on to PAGE
6 (Installing the bubble fairing, canopy and battery box )
Click HERE to move
on to PAGE
7 (Installing sheet type windows )
Click HERE to move
on to PAGE
8 (Important servo linkage information)
Click HERE to move
on to PAGE
9 (Landing light fixtures from a soda can)
Click HERE to
move on to PAGE 10
(Multiple ESC wiring information)
Click HERE to
move on to PAGE 11
(Top turret rotates right to left)
Click HERE to
move on to PAGE 12
(Covering information -removing wrinkles)
